How To Install A New Door Handle

How to install a new door handle

last alphabetize=two

Array (     [0] =>      [1] => new-door-handle ) WP_Term Object (     [term_id] => 47     [name] => Renovate     [slug] => renovate-0     [term_group] => 0     [term_taxonomy_id] => 47     [taxonomy] => category     [description] => Become inspired by these amazing DIY renovations completed by our readers. From bedrooms to kitchens and bathrooms, find out nearly how our readers improved every room in the home with structural and corrective upgrades.     [parent] => 37     [count] => 57     [filter] => raw     [cat_ID] => 47     [category_count] => 57     [category_description] => Get inspired by these amazing DIY renovations completed by our readers. From bedrooms to kitchens and bathrooms, find out about how our readers improved every room in the home with structural and cosmetic upgrades.     [cat_name] => Renovate     [category_nicename] => renovate-0     [category_parent] => 37 ) check====              

Reader Projects  ⁄ Renovate

Updating handles can instantly modernise an interior door for minimal outlay. Handles with locks can add extra privacy to bedrooms.

To supersede the door handle, cheque the existing lockset to make sure the replacement matches the hole already drilled, which may suit either 54mm cylinder locks or 35mm tubular locks.

Also measure the backset, which is the distance from the door edge to the eye of the pigsty.

TIP You can fit the lockset in minutes using a kit such as the Door Lock Installation Kit, almost $thirty, from Ryobi.

i. Remove the existing set

To remove the knobs, turn the rosette covers anticlockwise, and so unscrew the backing plate and remove it. Pull out the spindle and remove the latch faceplate. Drill 6mm holes for the new screws.

2. Secure the new latch

Check the new hardware fits the existing recess, using a chisel to enlarge information technology, if necessary. Position the latch in the door recess, so secure the faceplate in position using the supplied screws.

3. Install the handles

Insert the spindle through the latch pigsty and position the handles, securing with the screws provided. Apply a hex key to tighten the grub screws securing the handles, then push button on the rosette covers and plough them clockwise.

Source: https://www.handyman.net.au/new-door-handle

Posted by: hagamanchimplas.blogspot.com

Share this post